Karamba3D v1.3.3
English 英文
English 英文
  • Welcome to Karamba3D
  • 1: Introduction
    • 1.1: Installation
    • 1.2: Licenses
      • 1.2.1: Cloud Licenses
      • 1.2.2: Network Licenses
        • 1.2.2.1: Network license (archived)
      • 1.2.3: Temporary Licenses
      • 1.2.4: Standalone Licenses
  • 2: Getting Started
    • 2: Getting Started
      • 2.1: Karamba3D Entities
      • 2.2: Setting up a Structural Analysis
        • 2.2.1: Define the Model Elements
        • 2.2.2: View the Model
        • 2.2.3: Add Supports
        • 2.2.4: Define Loads
        • 2.2.5: Choose an Algorithm
        • 2.2.6: Provide Cross Sections
        • 2.2.7: Specify Materials
        • 2.2.8: Retrieve Results
      • 2.3: Physical Units
      • 2.4: Quick Component Reference
  • 3: In Depth Component Reference
    • 3.1: Model
      • 3.1.1: Assemble Model
      • 3.1.2: Disassemble Model
      • 3.1.3: Modify Model
      • 3.1.4: Connected Parts
      • 3.1.5: Activate Element
      • 3.1.6: Line to Beam
      • 3.1.7: Connectivity to Beam
      • 3.1.8: Index to Beam
      • 3.1.9: Mesh to Shell
      • 3.1.10: Modify Element
      • 3.1.11: Point-Mass
      • 3.1.12: Disassemble Element
      • 3.1.13: Make Beam-Set 🔷
      • 3.1.14: Orientate Element
      • 3.1.15: Select Element
      • 3.1.16: Support
    • 3.2: Load
      • 3.2.1: Loads
      • 3.2.2: Disassemble Mesh Load
      • 3.2.3: Prescribed displacements
    • 3.3: Cross Section
      • 3.3.1: Beam Cross Sections
      • 3.3.2: Shell Cross Sections
      • 3.3.3: Spring Cross Sections
      • 3.3.4: Disassemble Cross Section 🔷
      • 3.3.5: Beam-Joint Agent 🔷
      • 3.3.6: Beam-Joints 🔷
      • 3.3.7: Eccentricity on Beam and Cross Section 🔷
      • 3.3.8: Modify Cross Section 🔷
      • 3.3.9: Cross Section Range Selector
      • 3.3.10: Cross Section Selector
      • 3.3.11: Cross Section Matcher
      • 3.3.12: Generate Cross Section Table
      • 3.3.13: Read Cross Section Table from File
    • 3.4: Material
      • 3.4.1: Material Properties
      • 3.4.2: Material Selection
      • 3.4.3: Read Material Table from File
      • 3.4.4: Disassemble Material 🔷
    • 3.5: Algorithms
      • 3.5.1: Analyze
      • 3.5.2: AnalyzeThII 🔷
      • 3.5.3: Analyze Nonlinear WIP
      • 3.5.4: Large Deformation Analysis
      • 3.5.5: Buckling Modes 🔷
      • 3.5.6: Eigen Modes
      • 3.5.7: Natural Vibrations
      • 3.5.8: Optimize Cross Section 🔷
      • 3.5.9: BESO for Beams
      • 3.5.10: BESO for Shells
      • 3.5.11: Optimize Reinforcement 🔷
      • 3.5.12: Tension/Compression Eliminator 🔷
    • 3.6: Results
      • 3.6.1: ModelView
      • 3.6.2: Deformation-Energy
      • 3.6.3: Nodal Displacements
      • 3.6.4: Principal Strains Approximation
      • 3.6.5: Reaction Forces 🔷
      • 3.6.6: Utilization of Elements 🔷
      • 3.6.7: BeamView
      • 3.6.8: Beam Displacements 🔷
      • 3.6.9: Beam Forces
      • 3.6.10: Resultant Section Forces
      • 3.6.11: ShellView
      • 3.6.12: Line Results on Shells
      • 3.6.13: Result Vectors on Shells
      • 3.6.14: Shell Forces
    • 3.7: Export 🔷
      • 3.7.1: Export Model to DStV 🔷
    • 3.8 Utilities
      • 3.8.1: Mesh Breps
      • 3.8.2: Closest Points
      • 3.8.3: Closest Points Multi-dimensional
      • 3.8.4: Cull Curves
      • 3.8.5: Detect Collisions
      • 3.8.6: Get Cells from Lines
      • 3.8.7: Line-Line Intersection
      • 3.8.8: Principal States Transformation 🔷
      • 3.8.9: Remove Duplicate Lines
      • 3.8.10: Remove Duplicate Points
      • 3.8.11: Simplify Model
      • 3.8.12: Element Felting 🔷
      • 3.8.13: Mapper 🔷
      • 3.8.14: Interpolate Shape 🔷
      • 3.8.15: Connecting Beams with Stitches 🔷
      • 3.8.16: User Iso-Lines and Stream-Lines
  • Troubleshooting
    • 4.1: Miscellaneous Questions and Problems
      • 4.1.1: Installation Issues
      • 4.1.2: Purchases
      • 4.1.3: Licensing
      • 4.1.4: Runtime Errors
      • 4.1.5: Definitions and Components
      • 4.1.6: Default Program Settings
    • 4.2: Support
  • Appendix
    • A.1: Release Notes
      • Work in Progress Versions
      • Version 1.3.3
      • Version 1.3.2 build 190919
      • Version 1.3.2 build 190731
      • Version 1.3.2 build 190709
      • Version 1.3.2
    • A.2: Background information
      • A.2.1: Basic Properties of Materials
      • A.2.2: Additional Information on Loads
      • A.2.3: Tips for Designing Statically Feasible Structures
      • A.2.4: Hints on Reducing Computation Time
      • A.2.5: Natural Vibrations, Eigen Modes and Buckling
      • A.2.6: Approach Used for Cross Section Optimization
    • A.3: Bibliography
Powered by GitBook
On this page

Was this helpful?

  1. 3: In Depth Component Reference

3.2: Load

This chapter contains information regarding defining loads, disassembling mesh loads and setting prescribed displacements for supports.

Previous3.1.16: SupportNext3.2.1: Loads

Last updated 4 years ago

Was this helpful?