Karamba3D v1.3.3
English 英文
English 英文Chinese 中文
English 英文
English 英文Chinese 中文
  • Welcome to Karamba3D
  • 1: Introduction
    • 1.1: Installation
    • 1.2: Licenses
      • 1.2.1: Cloud Licenses
      • 1.2.2: Network Licenses
        • 1.2.2.1: Network license (archived)
      • 1.2.3: Temporary Licenses
      • 1.2.4: Standalone Licenses
  • 2: Getting Started
    • 2: Getting Started
      • 2.1: Karamba3D Entities
      • 2.2: Setting up a Structural Analysis
        • 2.2.1: Define the Model Elements
        • 2.2.2: View the Model
        • 2.2.3: Add Supports
        • 2.2.4: Define Loads
        • 2.2.5: Choose an Algorithm
        • 2.2.6: Provide Cross Sections
        • 2.2.7: Specify Materials
        • 2.2.8: Retrieve Results
      • 2.3: Physical Units
      • 2.4: Quick Component Reference
  • 3: In Depth Component Reference
    • 3.1: Model
      • 3.1.1: Assemble Model
      • 3.1.2: Disassemble Model
      • 3.1.3: Modify Model
      • 3.1.4: Connected Parts
      • 3.1.5: Activate Element
      • 3.1.6: Line to Beam
      • 3.1.7: Connectivity to Beam
      • 3.1.8: Index to Beam
      • 3.1.9: Mesh to Shell
      • 3.1.10: Modify Element
      • 3.1.11: Point-Mass
      • 3.1.12: Disassemble Element
      • 3.1.13: Make Beam-Set 🔷
      • 3.1.14: Orientate Element
      • 3.1.15: Select Element
      • 3.1.16: Support
    • 3.2: Load
      • 3.2.1: Loads
      • 3.2.2: Disassemble Mesh Load
      • 3.2.3: Prescribed displacements
    • 3.3: Cross Section
      • 3.3.1: Beam Cross Sections
      • 3.3.2: Shell Cross Sections
      • 3.3.3: Spring Cross Sections
      • 3.3.4: Disassemble Cross Section 🔷
      • 3.3.5: Beam-Joint Agent 🔷
      • 3.3.6: Beam-Joints 🔷
      • 3.3.7: Eccentricity on Beam and Cross Section 🔷
      • 3.3.8: Modify Cross Section 🔷
      • 3.3.9: Cross Section Range Selector
      • 3.3.10: Cross Section Selector
      • 3.3.11: Cross Section Matcher
      • 3.3.12: Generate Cross Section Table
      • 3.3.13: Read Cross Section Table from File
    • 3.4: Material
      • 3.4.1: Material Properties
      • 3.4.2: Material Selection
      • 3.4.3: Read Material Table from File
      • 3.4.4: Disassemble Material 🔷
    • 3.5: Algorithms
      • 3.5.1: Analyze
      • 3.5.2: AnalyzeThII 🔷
      • 3.5.3: Analyze Nonlinear WIP
      • 3.5.4: Large Deformation Analysis
      • 3.5.5: Buckling Modes 🔷
      • 3.5.6: Eigen Modes
      • 3.5.7: Natural Vibrations
      • 3.5.8: Optimize Cross Section 🔷
      • 3.5.9: BESO for Beams
      • 3.5.10: BESO for Shells
      • 3.5.11: Optimize Reinforcement 🔷
      • 3.5.12: Tension/Compression Eliminator 🔷
    • 3.6: Results
      • 3.6.1: ModelView
      • 3.6.2: Deformation-Energy
      • 3.6.3: Nodal Displacements
      • 3.6.4: Principal Strains Approximation
      • 3.6.5: Reaction Forces 🔷
      • 3.6.6: Utilization of Elements 🔷
      • 3.6.7: BeamView
      • 3.6.8: Beam Displacements 🔷
      • 3.6.9: Beam Forces
      • 3.6.10: Resultant Section Forces
      • 3.6.11: ShellView
      • 3.6.12: Line Results on Shells
      • 3.6.13: Result Vectors on Shells
      • 3.6.14: Shell Forces
    • 3.7: Export 🔷
      • 3.7.1: Export Model to DStV 🔷
    • 3.8 Utilities
      • 3.8.1: Mesh Breps
      • 3.8.2: Closest Points
      • 3.8.3: Closest Points Multi-dimensional
      • 3.8.4: Cull Curves
      • 3.8.5: Detect Collisions
      • 3.8.6: Get Cells from Lines
      • 3.8.7: Line-Line Intersection
      • 3.8.8: Principal States Transformation 🔷
      • 3.8.9: Remove Duplicate Lines
      • 3.8.10: Remove Duplicate Points
      • 3.8.11: Simplify Model
      • 3.8.12: Element Felting 🔷
      • 3.8.13: Mapper 🔷
      • 3.8.14: Interpolate Shape 🔷
      • 3.8.15: Connecting Beams with Stitches 🔷
      • 3.8.16: User Iso-Lines and Stream-Lines
  • Troubleshooting
    • 4.1: Miscellaneous Questions and Problems
      • 4.1.1: Installation Issues
      • 4.1.2: Purchases
      • 4.1.3: Licensing
      • 4.1.4: Runtime Errors
      • 4.1.5: Definitions and Components
      • 4.1.6: Default Program Settings
    • 4.2: Support
  • Appendix
    • A.1: Release Notes
      • Work in Progress Versions
      • Version 1.3.3
      • Version 1.3.2 build 190919
      • Version 1.3.2 build 190731
      • Version 1.3.2 build 190709
      • Version 1.3.2
    • A.2: Background information
      • A.2.1: Basic Properties of Materials
      • A.2.2: Additional Information on Loads
      • A.2.3: Tips for Designing Statically Feasible Structures
      • A.2.4: Hints on Reducing Computation Time
      • A.2.5: Natural Vibrations, Eigen Modes and Buckling
      • A.2.6: Approach Used for Cross Section Optimization
    • A.3: Bibliography
Powered by GitBook
On this page

Was this helpful?

  1. Troubleshooting

4.2: Support

Previous4.1.6: Default Program SettingsNextA.1: Release Notes

Last updated 4 years ago

Was this helpful?

Questions or concerns regarding your Grasshopper definitions should be posted in the Discussion Forums of our or at . We regularly give feedback on the forums and this enables the wider Grasshopper community to also contribute and gain knowledge from the discussion.

Other problems

In case you encounter any further problems please do not hesitate to contact us at .

Grasshopper Group
McNeel Forums
info@karamba3d.com